Introduction

Our factory recently completed a successful testing process for a wet Type floating fish feed making machine before shipment. During the factory trial, the machine continuously produced floating fish feed pellets with stable puffing performance, smooth pellet surfaces, and uniform pellet sizes.

The customer mainly evaluated steam conditioning performance, floating feed quality, production stability, and compatibility with local aquaculture feed formulas.

Compared with dry type fish feed machines, wet type floating fish feed processing systems provide better feed gelatinization, improved pellet stability, and more efficient continuous production for commercial aquaculture feed manufacturing.

---

What Was Tested During The wet Type Floating fish feed extruder machine Trial

During the testing process, engineers carefully monitored the complete floating fish feed production system.

Main Testing Items

• Floating performance of fish feed pellets
• Steam conditioning effect
• Pellet expansion stability
• Continuous production performance
• Feed moisture control
• Extrusion pressure stability
• Pellet appearance quality

The machine operated continuously during the test and maintained stable extrusion without material blockage.

---

Raw Materials Used During The Factory Test

The customer selected several commonly used aquaculture feed ingredients for practical testing.

Tested Feed Ingredients

• Corn flour
• Soybean meal
• Fish meal
• Wheat flour
• Rice bran
• Vitamin premix

These materials were mixed evenly before entering the conditioner and extrusion system.

Why Raw Material Testing Is Important

Different feed formulas directly affect:

• Floating performance
• Pellet density
• Expansion ratio
• Water stability
• Feed digestibility

Testing local raw materials before shipment helps customers improve production efficiency after installation.

---

What Is The Function Of The Conditioner In A wet Type floating fish food making machine

The conditioner is one of the key components in a wet type fish feed production system.

Main Functions Of The Conditioner

Steam Pre-Cooking

Steam heats and softens raw materials before extrusion.

Improved Feed Gelatinization

Better starch cooking improves pellet floating ability.

Stable Material Moisture

Conditioning improves moisture consistency before extrusion.

Reduced Screw Wear

Steam-softened materials reduce friction inside the extrusion chamber.

The testing process showed that conditioned materials produced smoother and more stable floating fish feed pellets.

---

Finished Floating Fish Feed Pellet Performance

The finished pellets produced during the machine trial showed stable quality suitable for commercial aquaculture feed production.

Pellet Features

Long Floating Time

Pellets floated continuously without sinking quickly.

Uniform Pellet Diameter

The extrusion system produced consistent pellet sizes.

Smooth Pellet Surface

Stable conditioning improved pellet appearance quality.

Good Water Stability

Pellets maintained structure in water and reduced feed waste.

Reduced Pellet Powder

Stable extrusion pressure reduced pellet breakage after drying.

These pellet characteristics are important for improving feed conversion efficiency in fish farming.

---

 Main Advantages Of The wet Type fish feed pellet extruder machine

Stable Continuous Production

Suitable for medium and large-scale aquaculture feed factories.

Better Pellet Quality

Steam conditioning improves pellet compactness and floating performance.

Higher Production Efficiency

Continuous operation supports commercial feed manufacturing.

Wear-Resistant Screw Structure

High-strength alloy screws improve machine service life.

Flexible Feed Formula Compatibility

Suitable for different fish feed formulations and aquatic species.

---

Floating Fish Feed Production Process During Testing

The factory test demonstrated the complete fish feed manufacturing workflow.

Production Steps

Raw Material Crushing

Large materials are ground into fine powder.

Feed Mixing

Ingredients are mixed evenly.

Steam Conditioning

Steam enters the conditioner to pre-cook materials.

Extrusion Puffing

The wet type fish feed extruder shapes and expands pellets.

Pellet Drying

The drying machine removes excess moisture.

Cooling And Packaging

Finished pellets are cooled before storage and packaging.

Stable process control helps maintain pellet quality consistency during commercial production.

---

Common Problems And Solutions During Fish Feed Production

Why Are Floating Fish Feed Pellets Not Expanding Properly?

Possible Causes

• Low steam temperature
• Insufficient starch content
• Low extrusion pressure

Solutions

• Increase conditioning temperature
• Improve feed formula ratio
• Inspect screw compression condition

---

Why Does The wet Type floating fish feed pellet maker machine Become Blocked?

Possible Causes

• Excessive feed moisture
• Large raw material particles
• Uneven feeding speed

Solutions

• Control moisture ratio properly
• Improve grinding fineness
• Maintain stable material feeding

---

Why Are Fish Feed Pellets Breaking After Drying?

Possible Causes

• Excessive drying temperature
• Rapid moisture removal
• Poor material mixing

Solutions

• Lower drying temperature gradually
• Extend drying time properly
• Improve feed mixing uniformity

---

Why Is The wet Type floating fish food maker machine Screw Wearing Quickly?

Possible Causes

• Abrasive raw materials
• Long-term overload production
• Insufficient conditioning effect

Solutions

• Improve raw material quality
• Avoid continuous overload operation
• Maintain stable steam conditioning

---

FAQ

Q1: What is the advantage of a wet Type fish feed making machine?

Wet type machines use steam conditioning to improve pellet quality, feed digestibility, and floating performance.

---

Q2: Can the wet Type fish feed pellet machine produce both floating and sinking fish feed?

Yes. Different formulas and machine settings can produce floating or sinking pellets.

---

Q3: Why are floating pellets sinking after production?

Low starch content or insufficient extrusion pressure may reduce pellet buoyancy.

---

Q4: What is the recommended moisture content before extrusion?

The recommended moisture level is usually around 20%-25% depending on the feed formula.

---

Q5: Why is steam conditioning important in fish feed production?

Steam conditioning improves starch gelatinization, pellet compactness, and feed expansion quality.

---

Conclusion

The successful wet Type floating fish feed pellet mill test demonstrated stable continuous production, reliable steam conditioning performance, and high-quality floating pellet output.

For commercial aquaculture feed manufacturers, wet type fish feed processing systems provide an efficient solution for producing floating aquatic feed with improved pellet quality, stable production capacity, and flexible feed formula compatibility.